Routine Maintenance Heating System Check

Routine Maintenance Heating System Check

Now that the cold season is just around the corner, it is important to have your heating system checked before winter. You wouldn’t want your HVAC breaking down in the middle of the winter season. Having the correct maintenance avoids costly furnace repair bills and gives assurance that it would keep on providing heat and comfort to your home throughout winter. Here are some home tips on how you can do your own fall maintenance heating system checks.

Get a Programmable Thermostat

It is a good idea to get a programmable thermostat for your heating system. This thermostat will automatically adjust your heating system to just the right temperature. It will always look for the most balanced and comfortable temperature for your home.

Check Air Filters

Dirty air filter is one of the main reasons why heating systems break down. Dusts and debris can easily accumulate and clog the air filter decreasing the efficiency of your heating system. If it is time to replace it, then better do it immediately. You can buy fiberglass filters that are cheap but if you have the money, the more expensive ones are a lot more efficient.

Clean Fan Blades

The next thing that you should consider is the fan blade. It is important to remember that the power of your HVAC is turned off before doing any maintenance check, especially when cleaning the fan blade. All kinds of dust can also accumulate on the fan blade and the best way to clean it is to use a vacuum. Do not push and bend the fan blades when you are cleaning it. Dust-free blades push the air more efficiently.

Lubricate & Repair Your Furnace

If you own an old furnace, it may need some oil for lubrication. It only needs just a few drops on its motor and blower shafts to keep it running smoothly. This should be done once in a year.

If your furnace is very noisy, it probably has a misaligned belt. Inspect your furnace blower and check its belt. The proper way to repair a misaligned belt is to simply loosen its screws and align it again using a carpenter’s square. Keep in mind that proper maintenance can reduce furnace repairs.

Check Your Vents

The vents in your home should be clean. Remove anything in the vent that can obstruct or block the gases coming from your furnace.
Lastly, you may want to consider upgrading or buying a new heating system to replace the old one. The newer models are more efficient and use less energy. They are also designed to last for many years.

This routine fall maintenance HVAC check is important if you don’t want any hassles or problems with your heating system this winter season. Get your heating system looked at before winter by following these tips or you can always call the HVAC specialists at Canoga Park Heating and Air Conditioning.

Categories: